Home » Roof Replacement

Roofing Contractor in Sacramento, CA

A new roof is a big step to protect your home. This service keeps your family safe and dry. First, we inspect your current roof to find any weak spots. Next, we remove the old materials down to the wood frame. Finally, we installed a strong new roof that will last for years.

Comprehensive Replacement Options

Putting New Shingles on Your House

We replace old roofs with new, strong materials. This service helps keep your family safe and warm. First, we install the GAF Timberline HDZ architectural shingles. These shingles are thick and protect your home from wind and rain. Next, we use a special pneumatic coil roofing nailer to secure each shingle tightly. This tool uses air pressure to drive nails quickly and safely. Finally, this process follows Sacramento City Code Section 15.20.080 fire safety guidelines. This means that your new roof will protect your home from fire risks in crowded neighborhoods.

Flat Roof Replacement for Businesses

We replace flat roofs for commercial buildings and warehouses. This service helps business owners protect their property and lower their energy bills. First, we lay down a thick 60-mil Firestone TPO flat roof membrane. This white rubber sheet acts as a solid cover to keep water out. Next, we use a Leister hot-air automatic weld tracker to fuse the seams together. This tool uses hot air to melt the edges so they stick together forever. Also, this white roof follows California Title 24 Part 6 cool roof solar reflectance regulations. This means that the building stays much cooler in the summer, and the business saves money on air conditioning.

Replacing Concrete and Clay Tiles

We replace heavy clay and concrete tiles on older homes. This service keeps your roof strong and prevents leaks from getting into your attic. First, we install Boral concrete roofing tiles & self-adhering underlayment to create a strong water barrier. Next, our workers wear non-marring tile-safety walk pads on their shoes. This tool helps us walk on the roof without cracking the new tiles. Also, this installation meets Placer County building department structural reinforcement checks. This means that your home's framing is strong enough to hold the heavy weight of the new tiles.

Building Standing Seam Metal Roofs

We build and install metal roofs for modern houses. This service gives your home a strong, long-lasting shield against the wind. First, we place the 24-gauge standing seam metal roofing panels side by side. Next, we lock the panels together using a mechanical seam locking tool. This tool folds the metal edges tightly so rain cannot leak through. Also, this roof meets CBC Section 1609 wind uplift resistance requirements. This means that your roof will stay secure even during high wind storms.

Wood Shake Roofs to Modern Shingles

We change old wood shake roofs into safe, modern shingle roofs. This service lowers your fire risk and makes your roof watertight. First, we tear off the old wood using a hydraulic shingle stripper scraper. This tool lifts the old wood quickly without damaging your framing. Next, we nail down new fire-rated CDX plywood decking overlays over the roof frame. This wood layer creates a solid base for the new shingles. Also, this conversion complies with California Residential Code Section R902 structural fire-barrier codes. This means that your home has a fireproof deck that meets local building safety rules.

Our Core Electrical Services

Redesigning Attic Ventilation Systems

We fix attic venting to let hot air escape from your house. This service lowers attic temperatures and stops moisture from rotting your wood. First, we cut openings in the roof using a reciprocating saw with structural framing blades. This tool cuts through wood decks cleanly. Next, we install O'Hagin low-profile attic vents over the cuts. These vents let hot air out but keep rain and birds from entering. Also, we size the system using California Residential Code Section R806 attic ventilation calculations. This means that your attic gets the exact amount of fresh air required to prevent rot and mold.

Repairing Rotted Roof Wood and Decking

We repair sagging or rotted wood on your roof frame. This service makes sure your roof has a solid foundation that will not collapse. First, we cut away the damaged wood using a heavy-duty circular framing saw. This tool cuts straight and removes rot safely. Next, we install new pressure-treated structural lumber and OSB sheathing to rebuild the frame. This wood is treated to resist future rot and moisture. Also, these repairs satisfy CBC Chapter 23 wood construction rules. This means that your roof framing is safe, strong, and fully approved by local building inspectors.

Our Roof Replacement Process

We make the roof replacement process simple and stress-free. Here is exactly what happens from your first call to the final walkthrough.

Free Roof Inspection

We start with a full roof inspection at no cost to you. Our team uses a thermal imaging scan to find hidden leaks, soft spots, and damaged decking. You get a clear report of what we find before any work begins.

Custom Material & Design Plan

Next, we sit down with you to pick the right materials for your home, budget, and local building codes. We show you shingle samples, tile options, and membrane choices so you can make a confident decision.

Permit Submission

Before we touch your roof, we submit all permit paperwork to the Sacramento Building Inspection Division. We handle every form and fee. You do not need to visit any city office.

Full Tear-Off and Installation

Our crew removes the old roof down to the wood deck. We check each board for rot and replace any damaged sections. Then we install your new roofing system layer by layer underlayment, materials, flashing, and ridge vents.

Final Inspection and Clean-Up

After installation, we do a full quality walk with you. We point out every detail of the new system. Next, we schedule the city's final inspection so your permit is officially closed. Also, we haul away all old roofing materials and leave your yard clean before we go.

Ready to protect your home?

Now you know what a full roof replacement includes. Our team handles shingles, tile, flat roofs, metal panels, and structural wood repairs all under one roof. If you are ready to protect your home, the next step is simple. Book a free roof inspection, and we will check your current roof, explain your best options, and give you a clear, no-pressure quote. There is no cost and no obligation.

Frequently Asked Questions

How do I know if I need a full roof replacement or just a repair?

There are a few clear signs that a full replacement is better than a patch job:

Age: If your roof is more than 20 years old, repairs may not solve the problem for long.
Wide spread damage: If more than 30% of the shingles are cracked, curled, or missing, a full replacement costs less over time.
Water inside the house: If you see stains on your ceiling or walls in more than one place, the roof deck may be damaged.
Sagging sections: If any part of the roof dips or sags, the wood frame below may be rotted and unsafe.

We always give you an honest assessment. If a repair is the right choice, we will tell you so.

How long does a full roof replacement take in Sacramento?

Most single-family home replacements take two to three days from start to finish. Here is how that breaks down:

Day 1: We remove the old roof and check the wood deck for rot or damage.
Day 2: We install the new underlayment, shingles, or membrane and secure all flashing.
Day 3: We install ridge vents, clean up all debris, and do a final safety walk.

Larger homes or tile roofs may take one or two extra days. We give you a clear schedule before we start.

What roofing materials work best in Sacramento's climate?

Sacramento has hot, dry summers and mild, wet winters. These materials work best here:

Architectural shingles: A popular choice. They handle heat well and resist wind up to 130 mph.
TPO membrane: Best for flat commercial roofs. The white surface reflects sunlight and lowers cooling costs.
Standing seam metal: Great for modern homes. Metal roofs last 40 to 70 years and resist fire and wind.
Concrete tile: A strong option for homes that need a heavy, long-lasting roof with a classic look.

We help you pick the right material based on your home style, budget, and local building codes.

Do I need a permit for a roof replacement in Sacramento?

Yes. A full roof replacement in Sacramento always requires a building permit. Here is what we handle for you:

We submit the permit application to the Sacramento Building Inspection Division on your behalf.
We schedule all required inspections, including the mid-point decking check and the final sign-off.
We give you a copy of the approved permit so you have it for your records.

You do not need to deal with the city yourself. We take care of every step.

Does a new roof add value to my Sacramento home?

Yes, a new roof adds real value to your property. Here is why it matters:

Resale value: Buyers pay more for a home with a new roof. It removes one of the biggest concerns during a home inspection.
Lower insurance premiums: Many insurance companies offer discounts for new roofs with Class A fire ratings.
Energy savings: A new cool roof or metal roof can cut your air conditioning costs during Sacramento’s hot summers.
Peace of mind: A new roof comes with a manufacturer warranty and our labor guarantee.

A strong roof is one of the best investments you can make in your home.